Choose your delivery country
Ships today when ordered before 15:00 CETShips today when ordered before 15:00 CET
Wisman Group

Uniflex Advanced Series — Tsubaki Kabelschlepp

Uniflex Advanced Series by Tsubaki Kabelschlepp: the complete end connectors series, available from stock.

All 39 articles of the Uniflex Advanced Series are listed below with full technical data. This end connectors series can be ordered online; inner height 26–44 mm, inner width 25–250 mm. Not sure about the right size or bend radius? Our engineers are happy to calculate your application.

39 articles in this seriesAll end connectors

  • Ordered before 15:00, shipped the same day
  • Datasheet and STEP file with every article
  • Technical advice from a design engineer

39 articles

All about end connectors

Technical guidance from our engineers: how to choose, what to measure and where installations fail in practice.

Fixed point and moving point

Every carrier needs two sets of end connectors: one at the fixed point (OB) and one at the moving point (MB). The version determines whether cables leave the chain at the top or bottom and whether the connector can pivot. Choose the same series as your carrier and bolt holes, chain hook and inner width line up straight away — with these parts there is no adapting between series.

Strain relief belongs with it

The end connector joins the carrier to the machine; strain relief holds the cables in place. Clamp every cable within 100 mm of the end connector so pulling force never reaches the connector. Use combs with rubber inserts or C-profile clamps instead of plastic cable ties, which cut into the jacket over thousands of strokes.

Frequently asked questions

The questions our technical desk receives most often about this category.

How do I choose the right size of end connectors?

Start with the fill: the thickest cable sets the minimum inner height, the sum of all diameters plus 10% clearance sets the inner width. Then pick a bend radius of at least ten times the thickest cable diameter. Filter on those three values on the left and only suitable articles remain.

What is the lead time and when do you ship?

Articles marked 'in stock' ship the same working day when ordered before 15:00 CET. Articles 'on request' are made to order at the manufacturer; the lead time is stated in the quotation, typically 5 to 15 working days.

Do I get technical documentation and CAD files?

Yes. Every article lists a datasheet, a manual and a STEP file for your 3D model. All are free to download, no account required.

Are the prices volume prices?

The price shown is per unit. From the indicated tier quantity onwards the lower price applies automatically and is calculated in the cart. Use the toggle at the top to show prices including or excluding VAT.

Didn't find what you were looking for?

We'll prepare a tailored quote. Fill in the quote form and you'll receive a matching quote by email within 3 hours on working days.

Request a quote

Also known as

These products go by several names in the market. If you searched for any of these terms, you are in the right place:

  • end connector
  • mounting bracket
  • chain end piece
  • moving end connector
  • fixed end connector