Cable protection hoses

Start with the fill: the thickest cable sets the minimum inner height, the sum of all diameters plus 10% clearance sets the inner width. Then pick a bend radius of at least ten times the thickest cable diameter. Filter on those three values on the left and only suitable articles remain.

Articles marked 'in stock' ship the same working day when ordered before 15:00 CET. Articles 'on request' are made to order at the manufacturer; the lead time is stated in the quotation, typically 5 to 15 working days.

Yes. Every article lists a datasheet, a manual and a STEP file for your 3D model. All are free to download, no account required.

The price shown is per unit. From the indicated tier quantity onwards the lower price applies automatically and is calculated in the cart. Use the toggle at the top to show prices including or excluding VAT.

The gland follows the hose's nominal width (NW) and manufacturer series. NW17 therefore takes an NW17 gland from the same series; the thread size (M, PG or NPT) is chosen for the enclosure wall. Mixing hoses and glands from different manufacturers almost always leaks.

Yes, provided the hose meets the carrier's bend radius and has its own chamber. Count the hose's outer diameter in the fill ratio; it is considerably larger than the cable itself.

Yes, we supply per metre from the reel and cut to the length you specify. State the length per piece so you receive continuous pieces rather than remnants.