Strain relief, separators and mounting hardware.
Accessories complete the installation: strain reliefs, separators, end connectors and mounting brackets. Order them together with the carrier or hose so the complete set arrives in a single delivery on site or in the workshop.
These accessories belong to the cable carriers: pick the same series and inner size as your chain.
3 articles
Delivery in 2-3 weeks
€ 1,06per stuks · excl. btw
10+ stuks: € 1,01 · 15+ stuks: € 0,98 · 20+ stuks: € 0,95
Delivery in 2-3 weeks
€ 2,16per stuks · excl. btw
10+ stuks: € 2,05 · 15+ stuks: € 2,00 · 20+ stuks: € 1,94
Delivery in 2-3 weeks
€ 0,96per stuks · excl. btw
10+ stuks: € 0,91 · 15+ stuks: € 0,89 · 20+ stuks: € 0,86
Technical guidance from our engineers: how to choose, what to measure and where installations fail in practice.
A complete installation is rarely just the carrier: budget for end connectors at the fixed and moving point, separators for core separation, a strain relief comb or bracket per end and mounting hardware for the machine. Long travels add guide troughs and support rollers. Order everything on the same purchase order and the complete set arrives in a single delivery.
Accessories are made per series and per inner width. A separator from another series will not click into the crossbars, and an end connector from another series has a different bolt pattern. So always check the series name and inner size of your existing carrier; both are on the datasheet and usually marked on the link itself.
Every series has its own page with the full size range, technical data and documentation.
The questions our technical desk receives most often about this category.
Start with the fill: the thickest cable sets the minimum inner height, the sum of all diameters plus 10% clearance sets the inner width. Then pick a bend radius of at least ten times the thickest cable diameter. Filter on those three values on the left and only suitable articles remain.
Articles marked 'in stock' ship the same working day when ordered before 15:00 CET. Articles 'on request' are made to order at the manufacturer; the lead time is stated in the quotation, typically 5 to 15 working days.
Yes. Every article lists a datasheet, a manual and a STEP file for your 3D model. All are free to download, no account required.
The price shown is per unit. From the indicated tier quantity onwards the lower price applies automatically and is calculated in the cart. Use the toggle at the top to show prices including or excluding VAT.
Didn't find what you were looking for?
We'll prepare a tailored quote. Fill in the quote form and you'll receive a matching quote by email within 3 hours on working days.
These products go by several names in the market. If you searched for any of these terms, you are in the right place:
